Blog (Single Entry)

Powdercoat Spray booth Post2

04Apr
  • Powdercoat Spray booth Post2

Well we put the metal brake to good use today! thats for sure.
Unfortunately the brake is only 4 feet wide and the booth is 5 so some overlapping had to occur.

IMG_2526

IMG_2529

IMG_2531

IMG_2532

 

Steve came in again to help. Here he is welding up some extra side braces to screw the sheet metal to.

IMG_2536

 

For now just gonna use what i have here, so a couple of 4″ hose attachments for the dust collector.

IMG_2539

Drew a rough idea and then hit it with the plasma cutter…

IMG_2542
IMG_2543

1/2″ threaded rod will hold the filter once i cut off the extra rod.

IMG_2544

Back all put together and sealed with silicone and tape.

IMG_2546

ready for filters

IMG_2551

and here we are… This booth has a floor, not to stand on, but to catch any powder that falls.
parts will be hung from the top with swivel mounts and you will stand outside the booth and spray inward.

IMG_2553

quickly threw some hoses on to test it for leaks

IMG_2556

This is the basic idea.
Still needs a few more pieces of sheet metal fit, and eventually the doors for the front to extend the booth out. But that will have to wait for now.

till next time 🙂